Phonak and Unitron Domes – £9.95 per pack of 10 domes.
Available in SDS 3 and SDS 4 versions. The two versions of domes used on Phonak and Unitron hearing aids are incompatible with each other, the easiest way to check is to remove the dome and look at the tip of the receiver wire / tube.
See the image to the right, if the tip looks like the top image you need to order SDS 3 domes.
If the tip looks like the bottom image then you should order SDS 4 domes.
All Phonak and Unitron thin tubes except SDS4 tubes use SDS 3 domes, SDS4 tubes must use SDS4 domes. Older Phonak and Unitron RIC receiver wires use SDS 3 domes, the newer Phonak and Unitron hearing aids use SDS 4 domes.
Please take care when ordering that you know what size and type of dome you require. If in doubt please ask our advice or alternatively the company that supplied your hearing aids.
Open Domes Small = 6-7mm diameter at base
Open Domes Medium = 8-9mm diameter at base
Open Domes Large = 10-11mm diameter at base
Closed / Vented Domes Small = 6-7mm diameter at base
Closed / Vented Domes Medium = 8-9mm diameter at base
Closed / Vented Domes Large = 10-12mm diameter at base
Power Domes Small = 10mm diameter at base
Power Domes Medium = 11-12mm diameter at base
Power Domes Large = 13mm diameter at base
Cap Domes = 4mm (SDS 4 only)
If you order the wrong size / type of dome but can return unopened and in a re-saleable condition we are happy to replace with the correct item, however we cannot accept opened packets that we cannot re-sell.